Race of Scribblers

This challenge consists in a race between two Scribblers. The main objective of the game is to have the best lap time and come first to the finish line.  Each Scribbler track completely separated from the other Scribbler by a wall, at one point the track has a crossover. The Scribblers can navigate through the track using the black line on the track or by using the walls as indicators of the left turn.

Race of Scribblers is part of a Scribbler Robot Contest held by SmartCubo Torneo Nacional de Robotica. Visit www.SmartCubo.com for details.

 

Race Game Rules

  1. Only unmodified Parallax Scribbler Robots (Serial #28136 or with USB Adapter #28336) using AA batteries are eligible to participate.
  2. The robots must start on their own start line.
  3. The start will be indicated by the main judge that will let the scribblers go.
  4. In the case that one robot laps another, it will be declared the winner and will have a free lap running alone to register its time. If this occurs in the final round the robot will be declared the final winner.
  5. In the elimination or qualification rounds, the robots will only make one lap, which will require returning to the start position.
  6. In this phase the qualification will be made out of the lap times, not the races won.
  7. In the final rounds, only the best 16 lap times will classify, that means the best 16 teams.
  8. In the final rounds the robots are going to race for two laps, and the winner will be the one that finishes first.

About the Race Track

  1. The robot can navigate following the ¾ (2 cm) black line that may have breaks in the line up to 2 inches (5 cm).
  2. Or, the robot can travel through the track by detecting the walls and avoiding crashing to them.
  3. All the turns in the circuit are to the left.
  4. The track may have irregularities, and may not be totally flat.
  5. The robots must be prepared to go up ramps that are up to 7 degrees of inclination.
  6. The distance between walls could vary between 10 and 14 inches (25 and 35 cm). The side of each wall is 3 ½ inches (9 cm).
  7. The black line may be curved with a radius of a minimum of 4 ¾ inches (12 cm) and 8 ¼ inches (21 cm).
  8. The distance between the corners of a turn is 17 ¾ inches (44.8 cm)

Download Race Track Dimensions