BlocklyProp blocks for interacting with the Propeller I/O pins available from the S3 Hacker Port.
The make PIN block sets the function and state of a Hacker Port digital I/O pin.
Select a Hacker Port digital I/O pin, P0 to P5.
Set the function and state with the second drop-down:
The check PIN block returns a 1 if the digital I/O pin selected is high and returns a 0 (zero) if the pin is low. It is used to read the pin as an input or to check what it was set to previously as an output.
The check analog PIN block returns the voltage (in volt-100ths) sensed by the specified analog Hacker Port I/O pin (A0 or A1)