Joystick-Controlled ActivityBot

Project By: Vale T
Level: Beginner
Hours to Complete: 1-2
Skills Required: Propeller C programming, building circuits on a breadboard, simple mechanical assembly

 

Have you ever wanted to drive your ActivityBot like you would an RC car? This project will let you control your ActivityBot remotely using a joystick mounted on an Activity Board.

This is a fun project that one can accomplish within an hour or two.

For this project, the following should already be completed:

  1. You have assembled the standard ActivityBot. If not, follow this link to assemble it and learn the basics of programming.
  2. You have an Activity Board with a 2-Axis Joystick installed. If not, follow this link to assemble and test the Joystick on the Activity Board’s breadboard.

 

What's Required

  • Access to a computer to program the ActivityBot robot and Activity Board
  • (1) or (2) USB cables (#805-00006) (only 1 is required)
  • (2) XBee modules of the same series (#32404 or #32405 are examples)
  • (1) 4 or 5-AA Battery Holder (#700-00038 or #753-00007), plus AA batteries
  • (4) Jumper wires