What it's about

This short tutorial will show you how to mount a Pixy2 CMUcam to a Shield-Bot robot with Arduino Uno. 

Before you start

You will need:

• A built and tested Shield-Bot robot with Arduino Uno (#32335)
• A Pixy2 CMUcam with Cable + Mounting Hardware (#30028)
• #1 Philips screwdriver
• #4 hex wrench
• Masking tape
• Pen

Complete this tutorial first:

• Robotics with the Board of Education Shield for Arduino, up through Chapter 4 at a minimum

After you Finish

Your Shield-Bot will be equipped to explore the Arduino resources on the Pixy2 wiki.