Block availability varies by Badge type.
Using any of the Badge RGB-LED blocks on the Badge WX will cause one processor to be launched automatically (one total, NOT one per block).
Compatible only with the Badge WX board type
The Badge RGB-LED setup block is used to tell the Propeller how many RGB-LEDs are connected to the Badge WX. The Badge WX has 4 RGB-LEDs built in and a pin available to connect more.
Compatible only with the Badge WX board type
The Badge RGB-LED set block is used to specify the color for a specific LED.
Compatible only with the Badge WX board type
The Badge RGB-LED set multiple block is used to specify the color for a range of consecutive LEDs.
Compatible only with the Badge WX board type
The Badge RGB-LED update block is used to update colors of all connected RGB-LEDs.
Compatible only with the Badge WX board type
The Badge LED brightness block sets the brightness of a specified LED.
Compatible only with the Hackable Electronic Badge board type
These Badge set LED blocks are used to turn the specified LED on or off.
Compatible only with the Hackable Electronic Badge board type
The Badge set RGB-LED block sets the specified RGB-LED to a specified color.