The color bands on the resistor should be red-red-brown-gold.
The resistor’s leads should be plugged into a socket by the center rail’s red line and the right breadboard’s a-16 socket.
The LED’s longer lead should be plugged into the right breadboard’s d16 socket, and the shorter one into f16.
The black wire’s ends should be plugged into the right breadboard’s j-16 socket and the other end into a socket by the right power rail’s blue vertical line.
Test the Circuit
Reconnect the USB cable to your computer.
Did the light come on? If not, go back over the Check Your Work list again.