Propeller BlocklyProp Block Reference

Badge LEDs

BlocklyProp Block Reference for BADGE LED blocks

Block availability varies by Badge type.

Using any of the Badge RGB-LED blocks on the Badge WX will cause one processor to be launched automatically (one total, NOT one per block).

Badge RGB-LED setup

Compatible only with the Badge WX board type

The Badge RGB-LED setup block is used to tell the Propeller how many RGB-LEDs are connected to the Badge WX. The Badge WX has 4 RGB-LEDs built in and a pin available to connect more.

Badge RGB-LED set

Compatible only with the Badge WX board type

The Badge RGB-LED set block is used to specify the color for a specific LED.

Badge RGB-LED set multiple

Compatible only with the Badge WX board type

The Badge RGB-LED set multiple block is used to specify the color for a range of consecutive LEDs.

Badge RGB-LED update

Compatible only with the Badge WX board type

The Badge RGB-LED update block is used to update colors of all connected RGB-LEDs.

Badge LED brightness

Compatible only with the Badge WX board type

The Badge LED brightness block sets the brightness of a specified LED.

Badge set LED

Compatible only with the Hackable Electronic Badge board type

These Badge set LED blocks are used to turn the specified LED on or off.

Badge set RGB-LED

Compatible only with the Hackable Electronic Badge board type

The Badge set RGB-LED block sets the specified RGB-LED to a specified color.

Printer-friendly version