Section 6 – Assembling and Mounting the Ping))) Sensors
Confirm that you have the following components:
Contact sales@parallax.com if parts or components are missing.
The Arlo Complete Robot System includes:
- (4) – Ping))) Sensor & Protector Stand Kits (#910-28015B)
Each of the (4) Ping))) Sensor & Protector Stand Kits includes the following components:
- (1) – Ping))) Sensor (#28015)
- (1) – Ping))) Protector Stand (#720-28002)
- (1) – Light pipe (#720-280021)
- (2) – 4-40 x ½” PH SS (#710-00006)
- (2) – Nylon washers, size #4 (#700-00015)
- (2) – Spacer, #4 x 1/4” (#713-00005)
You’ll also need the following parts (included in the Hardware Pack for Arlo):
- (8) – Screw, 6-32×1/2” Cap SS (#710-00033)
and
- Clear glue capable of bonding acrylic to aluminum.