Mount the Left Servo
Mounting the Left Servo in the Chassis
Parts needed for this step:
- (4) #4-40 nylon core lock-nuts OR regular nuts
- (4) 3/8-inch pan-head steel screws
- Servo with horn removed
- Parallax mini combo wrench
- Parallax screwdriver
- Position the left servo inside its chassis mounting hole so the spline is towards the middle of the robot and the servo cords are near the grommet.
- Secure the servo to the chassis using a 3/8-inch steel pan-head screw and nut in each of the four mounting holes.
