The Isolation System dampens vibrations created by the propellers to improve the performance of the flight controller.
Tools Needed:
- Small Flat-Head Screwdriver (optional)
Parts Needed:
- 1 - Chassis Assembly, prepared in Step 12
- 1 - Isolation Assembly, prepared in Step 16
- 4 - Vibration Damper, 80g
Instructions:
- Slowly and carefully insert a vibration damper into each of the four large holes on the top chassis plate. They are intentionally a snug fit, so it may help to twist them and/or carefully use a small flat head screwdriver to push them through. Don’t push too hard or use a sharp object, as that may damage the dampers.
- Place the isolation assembly over the chassis, lining up the front of the chassis with the arrow on the flight controller.
- Carefully feed the top flange of each damper through the corresponding hole on the isolation plate.