2-Axis Joystick

BlocklyProp reference for 2-AXIS JOYSTICK blocks

Only for Propeller Activity Board WX board type.

These blocks are for Parallax's 2-Axis Joystick (#27800) used only with the A/D converter built into the Propeller Activity Board (original or WX). 

New to this sensor? Click here to see an example schematic and quick Blockly program to help you get started.

Joystick x-axis

BlocklyProp block for Joystick x--axis A/D I/O pin connection selection

The Joystick x-axis block returns the horizontal position of the joystick, which can range from 0 to 100. 

Connect the Joystick's L/R (x-axis) pin to a numbered A/D socket on the Propeller Activity Board WX, and then set the A/D drop-down to that socket's number (0-3).

Joystick y-axis

The Joystick y-axis block returns the vertical position of the joystick, which can range from 0 to 100.

Connect the Joystick's U/D (y-axis) pin to a numbered A/D socket on the Propeller Activity Board WX, and then set the A/D dropdown to that socket's number (0-3).