Step 29: Fasten Propeller Adapters
The Propeller adapters allow you to easily attach and remove the Propellers, and ensure that they stay centered on the Motors.
Tools Needed:
Parts Needed:
- ELEV-8 v3 Assembly, prepared in Step 28
- 16 – Flat Head Phillips Screws, M2 x12mm (four included with each motor)
- 4 – Propeller Adapters (one included with each motor)
Instructions:
- Remove the nut and washer from the top of each propeller adapter and set aside for use in the next step.
- Place a Propeller adapter over the top of a motor, and align the screw holes with the motor.
- Use the supplied screws to secure the propeller adapter to the motor with the screwdriver. Tighten each screw until you begin to feel resistance, and then turn 1/8 of a turn more.
- Repeat for the remaining three motors.