As the number of wires and connections grows, it becomes increasingly easy to make minor mistakes in setting up the electrical connections. To minimize the risk of such a mishap, you will now label the ESCs with the motor numbers.
Tools Needed:
- Permanent Marker (or Paint Pen)
- Removable Tape (optional)
Parts Needed:
- 1 - Chassis Assembly with ESCs, prepared in Step 10
Instructions:
- Number the signal cable connectors for the ESCs, as shown in the images below, using the numbers on the top chassis plate. You may want to put a small piece of masking tape on each connector first if your marker does not show up well.