In the final step of boom assembly, you'll be fitting plastic caps to the end of the booms, which will help protect them from impact and gives the ELEV-8 a cleaner look!
Tools Needed:
- None
Parts Needed:
- 4 – Motor/Boom Assemblies, prepared in Step 4
- 4 - Plug, Fits 3/4"OD Tube (#700-00145)
Instructions:
- Take a tube plug and orient it such that the lines on the backside are parallel to the axis of the motor. If your plug looks different, no alignment is
necessary.
- Push the plug firmly into the end of the boom nearest the motor until it bottoms out.
- Repeat for the other three booms.