Step 5: Insert Tube Plugs
In the final step of boom assembly, you’ll be fitting plastic caps to the end of the booms, which will help protect them from impact and gives the ELEV-8 a cleaner look!
Tools Needed:
- None
Parts Needed:
- 4 – Motor/Boom Assemblies, prepared in Step 4
- 4 – Plug, Fits 3/4″OD Tube (#700-00145)
Instructions:
- Take a tube plug and orient it such that the lines on the backside are parallel to the axis of the motor. If your plug looks different, no alignment is
necessary.
- Push the plug firmly into the end of the boom nearest the motor until it bottoms out.
- Repeat for the other three booms.