Check the Servos

• Check your kit's servos.  It should have two Feedback 360° servos (#900-00360) with four wires, including a YELLOW wire for position feedback.

If your servos have four wires including a YELLOW wire, you have an ActivityBot 360°. You are in the right tutorial. Keep going!	If your servos have just three wires, and NO yellow wire, you have an original ActivityBot.  Switch to the Legacy Tutorial.

Check the Other Hardware

• Check the rest of your kit to see if anything is missing, parts can be obtained directly from Parallax: email sales@parallax.com or call 888-512-1024. 

Save for Later

These pieces won't be needed for the hardware assembly, so you can set them aside and save them for later activities.