Section 2 - Caster Wheel Kits

Tools you will need in this section:

  • Hex Key: 5 mm (included)
  • Hex Key: 5/32” (included)
  • Screwdriver: #1 Phillips and flathead combination screwdriver

Check your Caster Wheel Kits' contents with the list below before starting assembly.

  • (1) - Arm Assembly (#730-00010)
  • (1) - Swivel Block (#730-00020)
  • (1) - Swivel Rod (#730-00015)
  • (1) - Base Plate (#730-00025)
  • (2) - Socket Cap Screw, #6-32 x 1/4 inch length (#700-00086)
  • (1) - Set Screw, #6-32 x 1/8 inch (#710-00044)
  • (2) - Flange Bearing, 0.25 inch ID, 0.5 inch OD (#724-00002)
  • (1) - Shaft Collar, 0.25 inch ID (#726-00002)
  • (3) - Screw,#6x3/8”,Cap,SS (#710-00032)
  • (1) - Ball End Hex key 7/64” (#725-00021)
  • (1) - 3/32” Hex Key (#725-00025)
  • (1) - 1/16” Hex Key (#725-00062)

Contact Parallax sales department if any parts are missing. Otherwise, continue with the Caster Wheel Kit assembly section instructions.