Section 6 - Assembling and Mounting the Ping))) Sensors

Confirm that you have the following components:

Contact sales@parallax.com if parts or components are missing.

The Arlo Complete Robot System includes:

  • (4) - Ping))) Sensor & Protector Stand Kits (#910-28015B)

Each of the (4) Ping))) Sensor & Protector Stand Kits includes the following components:

  • (1) - Ping))) Sensor (#28015)
  • (1) - Ping))) Protector Stand (#720-28002)
  • (1) - Light pipe (#720-280021)
  • (2) - 4-40 x ½” PH SS (#710-00006)
  • (2) - Nylon washers, size #4 (#700-00015)
  • (2) - Spacer, #4 x 1/4” (#713-00005)

You’ll also need the following parts (included in the Hardware Pack for Arlo):

  • (8) – Screw, 6-32x1/2” Cap SS (#710-00033)

and

  • Clear glue capable of bonding acrylic to aluminum.