Taco Pinata Project

If you like Halloween and you like tacos, then you’ve come to the right place my friends! In this tutorial I do a “show and tell” of how I made a crawling piñata taco. Since the parts you end up using may vary (depending on whether you have access to a laser cutter) this tutorial is more of a guide rather than a step by step instruction manual. Let's get started!

Parts Used:

Tools Used:

  • Glue Gun
  • Drill with ⅛” drill bit
  • Phillips screwdriver

CAUTION: Always wear safety glasses when working with drills, hot glue, laser cutters or other tools!