Step 5 - Mount Left Servo

Mounting the Left Servo in the Chassis

Parts needed for this step:

  • (4) #4-40 nylon core lock-nuts OR regular nuts
  • (4) 3/8-inch pan-head steel screws
  • Servo with horn removed
  • Parallax mini combo wrench
  • Parallax screwdriver

  • Position the left servo inside its chassis mounting hole so the spline is towards the middle of the robot and the servo cords are near the grommet.

  • Secure the servo to the chassis using a 3/8-inch steel pan-head screw and nut in each of the four mounting holes.