Convert to a cyber:bot (Rev A or B board)

What its about

This tutorial shows you how to convert a built Boe-Bot with BS2,  or Shield-Bot robot with Arduino Uno, into a Python-programmable cyber:bot robot with a micro:bit module.  It takes the place of "Build your cyber:bot" in the cyber:bot Tutorial Series.

Before you start

You will need these items:

You will need to complete the following Prerequisite tutorials before assembly:

After you finish

Once your cyber:bot contstruction is complete, you will be ready to continue with the other tutorials in the cyber:bot Main Lessons.  These use the electronic components in your original robot's kit. If you need replacements, the Small Robot Electronics Pack (#572-28132) is available separately.