Connect your micro:bit

First, follow these steps to connect your micro:bit module to your cyber:bot board.

Parts needed

  • Insert a steel flat-head screw through an edge hole in the micro:bit, from the back (the labeled side).

  • Secure the flathead screw in place with a Nylon hex nut, from the front.

  • Repeat with the other edge hole in the micro:bit.

  • Place the micro:bit under the cyber:bot board so the screws come through the mounting holes.
  • Secure each screw with a black Nylon acorn nut.

Now you are ready to build the cyber:bot chassis.